Resin Art Supplies' professional-grade clear resin and hardener, the perfect solution for all your resin art needs. This high-quality resin and hardener kit is designed to help you create stunning art pieces with a glass-like and bubble-free finish, completely free of imperfections.
Crafted with the highest-quality materials, our clear resin and hardener are engineered to produce a flawless finish that will enhance the beauty of your art. The crystal-clear transparency of the resin ensures that your artwork will be visible in all its glory, making it perfect for a wide range of applications, including jewellery making, table tops, and home décor.
CRYSTAL CLEAR, VOC-FREE, HIGH GLOSS, ODOURLESS, BUBBLE FREE, SELF-LEVELLING, FAST CURING
Here are 1:1 instructions to get you started:
- Mix 1 part resin and 1 part hardener by weight for bubble-free finish
- Add pigments to create custom colours
- Allow 10-12 hours for curing
- Work time of 40 minutes
- Wear PPE while handling
- Clean surface before applying
- Suitable for resin art, jewelry, coasters, and small molds
- Resin depth of 1cm-1.5cm for best results
- Use clean, graduated cups for measuring
- Mix for 3-5 minutes with a clean stir stick
Epoxy resin 1:1 is ideal for keychains and coasters up to 1.5cm in depth.
MIXING GUIDELINES
- Use clean, graduated cups for measuring the clear casting resin and mix by hand using a clean stir stick.
- Watch for the resins to turn cloudy white, indicating the components are starting to blend. Gradually, it will turn completely transparent until you can see the bottom of the container.
- Do not whip as this will result in air bubbles in the cured jewellery resin. Scrape the sides of the bucket and stick while mixing.
- Pour the mix when there are no more thin, hazy lines remaining or wait until the mixing container starts to become slightly warm to the touch to reduce working time.
- Slowly pour mixed clear epoxy down the side of the mould to avoid introducing additional air bubbles.
- For best results, use RAS Crystal Clear Epoxy Resin at room temperature of 25-26°C and allow curing for 18-24 hours.
⚠️ WINTER WARNING! ⚠️
In colder weather, remember these key tips for your resin projects:
1. Warm Your Resin: If it's stored below 21°C, gently warm both resin parts in warm water NOT HOT for 10 minutes before mixing.
2. Steady Workspace Temperature: Maintain a constant working temperature between 22°C and 27°C for the best results.
These precautions will ensure your resin projects turn out perfectly, even in chilly conditions. ❄️🌟
GENERAL ADVICE:
Following inhalation: Move victim into the fresh air.
Following skin contact: Take off contaminated clothing and shoes immediately. Wash off with plenty of water for at least 15 minutes and consult a physician if feeling uncomfortable.
Following eye contact: In case of contact, it may irritate, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician immediately if your eyes are hurt.
Following ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a physician.
